Homeowners need to know that together with planning and patience and skill, they ought to have specialized equipment as well when considering hardwood floor refinishing. This project is something that requires research, knowledge and time out of all other home improvement projects that homeowners can have. You’ll go through many steps or stages that include preparing, evaluating, sanding as well as sealing your hardwood floors.
In any of the said stages or steps, even a slight touch of error is enough to cause problems that can last for a long time. Yes, you can refinish the entire hardwood flooring alone but, it is wise that you get some help at some parts. It will take around 1 to 3 weeks to carry out refinishing for this kind of flooring.
Step 1. Checking the hardwood floor – it is your job to determine whether or not the hardwood floor planks is a laborious process. You need to evaluate if the floor suffered from water, pet urine or spills. In an effort to see if the boards are very thin to be sanded, you can pull up one threshold of the door. You additionally need to find out if the last sealant was varnish, wax or polyurethane. Of course, to know if the hardwood flooring have deep gouges or dramatic wear patters, you’ve got to give it a thorough examination.
The Beginners Guide To Flooring (Getting Started 101)
Step 2. Preparing the flooring – you must prepare the flooring first before you do hardwood floor refinishing. If most hardwood planks don’t have scratches or holes, are at least 3/4 inches thick and have same amount of sealant, you’re ready to start with the preparation.
Getting Down To Basics with Options
Cleaning the whole floor area is the first thing that you’ve got to do. It is vital as well to file holes from nails, staples or scrapes. Moreover, you will have to pull up the baseboards and the thresholds too. Even if one of the floors doesn’t look good, you have to do all the floors to keep it consistent.
Step 3. Sanding – probably, this is the most daunting and demanding step that you will ever do. You’ll have to rent a drum sander equipment, it’s loud to use and you have to roll it on the entire hardwood flooring 3x to be able to peel off the top layer of the finish.
Step 4. Staining and sealing – before you get started on this step, you have to be sure that every single bit of sawdust is gone so it doesn’t contaminate the sealing and staining applications. Once you’re done staining the floor, you now have to seal it with thin layer of sealant to be sure that the stain is dried completely prior to application.